Table of Contents
Advertisement
10, Rarove the eylindar head ene cylinder.
11, Reirove the quide stoppers.
Piston Pin and Piston
1 Remove the piston pin clip fom the
piston
NOTE:
———
Below removing the piston pin clip, cover
the crankcase with a clean rag sc you will
not accidentally droo the cliy into the
crankcase.
35
ek
*
2. Push the piston pin from the opposite
side, ther pull out
eae ee
wWOTe |
———__________
Belore removing piston pin, deburr the clip
groove and pin hole area,
Gmnkease Gaver
and Starter
Motor
1. Remove the oil fitter cover holding hots
and the caver
Remove the oil filter element
3. Remove the crankcase cover holding
bolts and the cover.
(Aight)
'oval, slits in the erankease can Do
used as shown in the photo.
Advertisement
Table of Contents
