Maintenance Specifications; Engine - Yamaha TW200 Service Manual

_ _ _ _ _ _ M_A_I_N_TE_N_A_N_C_E_S_P_E_C_IF_IC_A_T_IO_N_S_I
SPEC
I
fJ f I
MAINTENANCE SPECIFICATIONS
ENGINE
Model TW200T/TC
Cylinder Head:
Warp Limit*
Cylinder:
Bore Size/Measuring Point*
Wear Limit
<0.03 mm (0.0012 in>
*Lines indicate straightedge measurement.
66.97 -67.02 mm (2.637 -2.639 in)/40 mm (1.6 in)*
<67.10 mm (2.642 in) >
Camshaft:
Drive Method
Cam Cap Inside Diameter
Camshaft Outside Diameter
Shaft-to-cap Clearance
Cam Dimensions:
Intake: HA"
Exhaust:
"A"
Camshaft Runout Limit
Cam Chain Type/Number of Links
Cam Chain Adjustment Method
Rocker Arm/Rocker Arm Shaft:
Arm Inside Diameter
Shaft Outside Diameter
Arm-to-shaft Clearance
<Limit>
Chain (Left)
25.000 - 25.021 mm (0.984 - 0.985 in)
24.96-24.98 mm (0.983-0.983 in)
0.020-0.061 mm (0.0008-0.0024 in)
36.538-36.638 mm (1.438-1.442 in)
30.152-30.252 mm (1.187-1.191 in)
6.588 mm (0.259 in)
36.58-36.68 mm (1.440-1.444 in)
30.266-30.366 mm (1.192-1.196 in)
6.63 mm (0.261 in)
<0.03 mm (0.0012 in»
DID 25SH/104 Links
Manual
12.00-12.02 mm (0.4724-0.4731 in)
11.98 -11.99 mm (0.4717 - 0.4721 in)
0.009-0.037
mm
(0.0004-0.0015 in)
<
0.1 mm (0.04 in)
>
2-4