Yamaha TW200 Service Manual page 234

SIGNAL SYSTEM
I
ELEC
I
53
I
I
THE BRAKE LIGHT DOES NOT COME ON. I
FAULTY
1. Battery inspection:
Check the battery condition. Refer to • • •
~
"CHAPTER 3. BATTERY INSPECTION"
section.
OK
. . . . - - - - - - - - - - - - - - -..... FAULTY
2. Fuse inspection:
Check the fuse condition. Refer to "CHAP- • • • •
TER 3. FUSE INSPECTION" section.
OK
3. Brake light
bul~
conduct check: FAULTY
- Remove the taillight lens and bulb.
-Check the brake light bulb condition.
Refer to "LIGHTING SYSTEM" section.
OK
4. Brake light bulb socket conduct check: FAULTY
Check the brake light bulb socket con- • • •
~
dition. Refer to "LIGHTING SYSTEM"
section.
OK
Battery is faulty.
Recharge or replace battery.
Fuse is faulty.
Replace it.
Brake light bulb is faulty.
Replace it.
Brake light bulb socket is faulty.
Replace it.
5. Front and rear brake switches test:
- Disconnect the front and rear brake
switch couplers.
-Connect the front brake switch terminals
(Brown
CD
and Green/Yellow
(2))
and TAILLIGHT DOES NOT COME ON.
rear brake switch terminals (Brown
@ I
and Yellow
@)
with the jumper leads
@. • • •
~
Check the main switch.
-Turn the
mainsw~chtol'ON/',
and check
~~~~~~~~~~~~~-
the brake light condition.
D
5
2
*
TAILLIGHT COMES ON.
7-39