Oil Pump; Starter Motor - Yamaha TW200 Service Manual

4. Bend both lock washer tabs
CD
along both
nut flats.
Nut (Primary Drive Gear):
50 Nm (5.0 m-kg, 36 ft-Ib)
Nut (Balancer Gear):
50 Nm (5.0 m-kg, 36 ft-Ib)
NOTE: _
Place a folded rag between the teeth of the
balancer drive gear and driven gear to lock them.
ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
I
~.I
3. Tighten:
-Nut
CD
(Primary drive gear)
-Nut
@
(Balancer gear)
OIL PUMP
1. Install:
-Gasket (New)
-Oil pump
CD
Screws (Oil Pump):
7 Nm (0.7 m-kg, 5.1 ft-Ib)
2. Install:
- Starter motor
STARTER MOTOR
1. Lubricate:
- Lithium soap base grease
Onto the O-ring
CD
(Starter motor).
Bolts (Starter Motor):
10 Nm (1.0 m-kg, 7.2 ft-Ib)
4-54