Assembly; Installation - Yamaha TW200 Service Manual

REAR SHOCK ABSORBER AND SWINGARM
ICHASI
c!:fe
I
3. Wash the bushes, the swingarm pivot, shims
and thrust covers in a solvent.
4. Inspect:
- Rear shock absorber
Oil leaks/
Damage~
Replase.
5. Inspect:
-Swingarm
Bends/ Cracks/ Damage--+ Replace.
6. Inspect:
-Bushes
Wear/
Damage~
Replace.
7. Inspect:
-Oil seal (Thrust cover)
-Oil seal (Swingarm pivot)
Damage--+ Replace.
ASSEMBLY
1. Install:
- Bush (Left and right)
CD
-Shim(s)
@
-Thrust cover
®
To swingarm.
NOTE: _
Apply the lithium soap base grease onto the bush-
es, thrust covers, oil seals and swingarm pivot.
INSTALLATION
Swingarm
Reverse removal procedure.
Note the following points.
1. Install:
-Swingarm
NOTE: _
Apply the lithium soap base grease onto the pivot
shaft.
Nut (Pivot Shaft):
80 Nm (8.0 m-kg, 58 ft-Ib)
6-31