Yamaha TW200 Service Manual page 138

ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
I" ..
I
10. Install:
-Springs (Pressure plate)
-Salts (Pressure plate)
Bolts (Pressure Plate):
6 Nm (0.6 m.kg, 4.2 ft·lb)
NOTE: _
Tighten the bolts in stage, using a· crisscross
pattern.
11. Turn:
-Push lever
To align the push lever pointer
CD
with the
crankcase embossed mark
@.
12. Turn:
-Push rod #1
In or out until it lightly seats against a push
rod ball.
13. Tighten:
-Locknut
~ocknut
(Push Rod):
8
Nm (0.8
m.kg, 5.8
ft·lb)
CD
Locknut
®
Push rod #1
14. Install:
-Dowel pins
- Gasket (Crankcase cover)
-Crankcase cover (Right)
-Kick crank
Bolt (Kick Crank):
20 Nm (2.0 m.kg, 14 ft·lb)
NOTE: _
Tighten the screws (crankcase cover-right) in
stage, using a crisscross pattern.
4-58