Installation - Yamaha TW200 Service Manual

_ _ _ _ _ _ _ _ _ _ _ _ _
R_~_R_W_H_E_E_LICH~I~I
4. Check:
-Wheel balance
Refer to IIFRONT WHEEL-INSPECTION"
section.
5. Check:
-Wheel bearings
Refer to IIFRONT WHEEL-INSPECTION"
section.
6. Inspect:
- Brake lining surface
Refer to IIFRONT WHEEL-INSPECTION"
section.
7. Measure:
- Brake lining thickness
Refer to IIFRCI'J
r
WHEEL-INSPECTION"
section.
Brake Lining Thickness:
4 mm (0.16 in)
Wear Limit:
2 mm (0.08 in)
8. Inspect:
- Brake drum inner surface
Refer to IIFRONT WHEEL-INSPECTION"
section.
9. Measure:
- Brake drum inside diameter
Refer to "FRONT WHEEL-INSPECTION"
section.
Brake Drum Wear Limit:
111 mm (4.37 in)
INSTALLATION
Reverse the removal procedure.
Note the following points.
1. Apply:
- Lithium soap base grease
To the axle shaft and brake camshaft.
-Wheel bearing grease
To the bearings.
6-9