Kick Starter - Yamaha TW200 Service Manual

~~~~~~~~~IN_S_P_E_C_T_IO_N~A_N_D~R_E_P_A_IR_IENGI~I
4. Inspect:
-Guide bar
Roll the guide bar on a flat surface.
Bends~ Replace.
WARNING:
Do not attempt to straighten a bent guide
bar.
5. Measure:
-Transmission shaft runout
Use centering device and dial gauge.
Out of
specification~
Replace bent shaft.
~
Maximum Runout:
0.04 mm (0.001 in) .
6. Inspect:
-Gear teeth
Blue
discoloration/Pitting/Wear~Replace.
-Mated dogs
Rounded edges/Cracks/Missing
portions~
Replace.
7. Check:
-Proper gear engagement (Each gear)
(to its counter part)
-Gear movement
Roughness~ Replace.
KICK STARTER
1. Inspect:
- Kick gear teeth
CD
- Kick idle gear teeth
@
Damage/Wear~
Replace both gears.
4-34