Yamaha TW200 Service Manual page 71

I
IANOSJP
I
~
I
FRONT FORK OIL REPLACEMENT 1rZ'".
---------------------------
9. Fill:
-Front fork
With recommended fork oil.
Recommended Fork Oil:
YAMAHA Fork Oil 10WT or
Equivalent
Oil Capacity:
238 cm
3
(8.38 Imp
OZ,
8.05 US
OZ)
10. After filling slowly pump the forks up and
down to distribute the oil.
11. Measure:
- Front fork oil level
®
Measuring steps:
- Make sure the collar and the fork spring is
removed.
- Fully bottom the front fork.
-Me~sure the front fork oil level.
I~
Fork Oil Level:
135 mm (5.32 in)
From the Top of the Inner Tube
Fully Compressed Without
Spring.
NOTE: _
- Measure the fork oil level at the cylinder center
line.
-When measuring the fork oil level, make sure
that the handlebar is positioned for a straight
run.
Out of specification
--+
Adjust.
12. Install:
- Fork spring
-Collar
-Cap bolt
Cap Bolt:
23 Nm (2.3 m-kg,
17
ft-Ib)
13. Tighten:
-Pinch bolt (Upper)
Pinch Bolt (Upper):
23 Nm (2.3 m-kg, 17 ft-Ib)
3-25