Yamaha TW200 Service Manual page 182

STEERING AND HANDLEBAR
ICHASI
~
I
6. Install:
-Handlebar
- Clutch cable
- Handlebar switches
-Brake cable
-Bands
- Front fender
NOTE: _
- Apply the light coat of lithium soap base grease
onto the right side handlebar end.
- Apply the lithium soap base grease onto the ca-
ble end.
ii.Blli
-----------
Proper cable and lead routing is essential to
insure safe motorcycle operation.
Refer to IICHAPTER 2-CABLE ROUTING"
section.
Bolt (Handlebar):
23 Nm (2.3 m.kg, 17 ft.lb)
7. Install:
- Front wheel
Refer to "FRONT WHEEL-REMOVAL"
section.
Front Wheel Axle:
90 Nm (9.0 m.kg, 65 ft.I~)
8. Adjust:
- Front brake lever free play
-Clutch cable free play
Refer to "CHAPTER 3-CLUTCH ADJUST-
MENT and BRAKE CABLE ADJUSTMENT"
section.
Front Brake Lever Free Play:
10-20
mm
(0.4-0.8
in)
Clutch Lever Free Play:
2-3
mm
(0.08-0.12
in)
6-24