Yamaha TW200 Service Manual page 237

SIGNAL SYSTEM. I
ELEC
I
a
I
*
5. Battery voltage test:
-Disconnect the neutral switch lead (Sky
blue
CD -
wireharness side).
-Connect the positive lead
(2)
of the Pock-
et Tester (YU-03112) to the neutral switch LESS THAN 12V
lead (Sky blue - wireharness side).
- Ground the negative lead
@
of the Pock- • • • • 1 Check main switch.
et Tester to the battery (-) terminal. '
-Turn the main switch to liON", and meas-
ure the battery voltage.
6. Neutral switch test:
-Grq.und the neutral switch lead (Sky blue
CD -
wireharness side) to the battery
( -) terminal with the jumper lead
(2).
-Shift the gear in neutral. LIGHTS
-Turn the main switch to liON", and check • • • •
the IINEUTRAL" indicator light condition.
Neutral switch is faulty.
Replace it.
FAULTY
7. Check entire signal system for connection:
~ I
Refer to
"~IRING DIAGRA~"
section. • • •
I
y •
~C_o_r_re_c_t_.~~~~~~~~~~~
7-42