Starter Motor - Yamaha TW200 Service Manual

ELECTRICAL STARTING SYSTEM
I
ELEC
1
53
I
STARTER MOTOR DOES NOT MOVE.
...----------------
......
STARTER MOTOR DOES
NOT MOVE.
6. Starting circuit cut-off relay test:
-Connect the starting circuit cut-off relay
coupler to the wireharness.
- Disconnect the neutral switch coupler
CD·
-Connect sky blue lead (wireharness side)
to the Battery ( - ) terminal; Use jumper
lead
CZ).
-Push the IISTART" switch in.
STARTER MOTOR
MOVES.
7. Neutral switch test:
-Connect the neutral switch coupler to the • • •
~
wireharness.
-Shift in neutral.
- Push the liST ART" switch in.
Starting circuit cut-off relay is faulty.
Replace it.
Neutral switch faulty. Replace it.
STARTER MOTOR MOVES.
8. Sidestand and clutch switch test:
-Shift in gear.
_lIpuli in the clutch lever". And
I I
retract the
sidestand" .
- Push the liST ART" switch in.
STARTER MOTOR DOES NOT MOVE.
The following part(s) is faulty.
- Clutch switch
-Sidestand switch
-COl unit
Replace faulty part(s).
Refer to IISWITCHES INSPECTION" section.
7-19