How To Use Information; How To VSually Check MaNtenance/NspectOn NformatOn - JUKI AB-1351 Instruction Manual

2-34. How to use information

B
A
(1) How to visually check maintenance/inspection information
A
B
D
When you press nformaton key
ton of the data entry screen, the nformaton screen s dsplayed.
B Maintenance/inspection information
C
Tme for changng ol (grease run-out), tme for changng the
needle and time for cleaning can be specified to output a
warning notice when the specified time is reached.
"@-2-34. (1) How to visually check mainte-
→ Refer to
nance/inspection information", p.109.
→ Regardng the method to desgnate a tme, refer to the En-
gneer's Manual.
C time setting
The current tme can be set.
"@-2-34. (3) How to carry out time setting",
→ Refer to
p.111.
1 Displaying the maintenance/inspection information screen
Press mantenance/nspecton nformaton button
the nformaton screen.
Three nformaton tems are dsplayed on the mantenance/n-
specton nformaton screen.
B : Needle changng
(unt: 1,000 sttches)
C
C : Cleanng tme (unt: hour)
D : Ol changng tme (unt: hour)
Items buttons B , C and D dsplay nspecton warnng nterval
E and the remanng tme before changng F .
In addton, the remanng tme before changng can be cleared.
– 109 –
A on the swtch sheet sec-
A on
F
E