Table of Contents
Advertisement
2-12. How to copy a belt loop pattern number
It s possble to copy the sewng data of a regstered belt loop pattern number can be coped to an un-
regstered belt loop pattern number. Overwrte copy of the belt loop pattern number s prohbted. If you
want to overwrte a belt loop pattern number, t s necessary to delete the pattern number you do not
need n advance.
→ Refer to
"@-2-11. How to select a belt loop pattern number",
A
B
D
E
F
1 Displaying the data entry screen
Only on the belt loop ndvdual sewng data entry screen (blue)
on whch the pattern button s selected, the belt loop pattern
number can be coped. If the sewng screen (green), s ds-
played, press the set ready key
screen (blue).
2 Bringing up the pattern copy screen
When you press pattern copy button
ton copy (selecton of the source pattern to be coped) screen
s dsplayed.
3 selecting a copy source pattern number
Select a copy source belt loop pattern number from belt loop
pattern number lst button B .
Then, when you press copy destnaton entry button
the copy destnaton entry screen s dsplayed.
C
4 Entering a copy destination pattern number
Enter a copy destnaton belt loop pattern number usng nu-
merc keys D . It s also possble to search for an unused belt
loop pattern number usng +/- buttons
5 starting copying
Press enter button
tern number. The screen wll return to the belt loop pattern No.
G
copy (copy source selecton) screen wth the coped belt loop
pattern No. beng selected.
*
It s also possble to copy the cycle sewng data followng the
smlar procedure.
– 52 –
p.50.
to dsplay the data entry
A , the pattern but-
G to start copy of the belt loop pat-
C ,
( F , E ).
Advertisement
Table of Contents
