Table of Contents
Advertisement
!. Machine (about the sewing machine)
Precautions for use
Followng tems have to be checked every workng day before the operaton of the machne and before the start
of work hours.
1. Ascertain that the oil pan is filled with the predetermined amount of oil.
2. Never operate the machine unless the oil pan has been filled up with oil.
3. Ascertain that the pressure gauge indicates the designated air pressure of 0.5 MPa.
* (this is necessary particularly when the compressor is stopped for a lunch break or the
like.)
If the compressed air pressure is equal to or less than the designated value, troubles such
as interference between the parts can occur. It is therefore necessary to carefully check the
compressed air pressure.
4. check whether the needle thread/bobbin thread need to be replenished.
5. to perform sewing immediately after turning on the power switch, perform trial stitching
first, then proceed with sewing of actual products after the test sewing.
6. In the case drainage water accumulates in the regulator section, expel it from there before
starting work.
– 1 –
Advertisement
Table of Contents
