Table of Contents
Advertisement
2-31. using communication function
Communcaton functon can download the sewng data created wth other sewng machne, creaton of
sewng data and sewng data created by edtng devce PM-1 to the sewng machne. Furthermore, the
above data can be uploaded to a meda.
As the means of communcaton, a meda slot and USB port are prepared.
(1) Handling possible data
Sewng data that can be handled are 2 knds below, and the respectve data formats are as shown be-
low.
Data name
Vector format data
sewing data
(2) Performing communication by using the media
For handlng way of the meda, read
(3) Performing communication by using usB
Extension
VD000XXX.VDT
AB00XXX.EPD
"@-1. IntroDuctIon", p.27.
Data can be sent/receved to/from a personal
computer or the lke, by means of a USB cable.
– 102 –
Description of data
It s the data of needle entry pont created wth
PM-1, and the data format that can be operated
n common between JUKI sewng machnes.
Exclusve sewng data for AB model of the
sewng machne created wth the sewng
machne.
If the contact part becomes dirty, fail-
ure of contact will be caused. Do not
touch by hand, and control so that
dust, oil or other foreign material does
not adhere to it. In addition, the inside
element is damaged by static electrici-
ty or the like. so, be very careful when
handling.
XXX: Fle No.
Advertisement
Table of Contents
