Table of Contents
Advertisement
(2) How to reset the warning
(3) How to set the time
B
When the specified inspection time is reached, the warning screen
s dsplayed.
To clear the nspecton tme, press clear button
B
specton tme s cleared and the popup screen s closed.
If you do not clear the nspecton tme, press cancel button
A
to close the popup screen. It should be noted, however, the warn-
ng screen wll be dsplayed every tme one sewng sequence s
finished until the inspection time is cleared.
Warnng number for each nspecton tem s as follows:
・Needle changng
・Cleanng tme
・Tme for changng ol
1 Displaying the time setting screen
Press tme settng button
A
2 setting the current time of day
D
Press respectve buttons B to set the tme of day (year,
month, day, hour: mnute: second).
When you press enter button
tered.
When you press cancel button
nvald and the screen returns to the nformaton screen.
C
– 111 –
: A201
: A202
: A203
A on the nformaton screen.
C , the set tme s regs-
D , the set tme becomes
A . The n-
B
Advertisement
Table of Contents
