Table of Contents
Advertisement
2-8. Using counter
(1) Setting procedure of the counter
A
B
C
D
F
1 Display the counter setting screen
Press
switch and the COUNTER SETTING button
A is displayed on the screen. When this button is pressed, the
counter setting screen is displayed.
2 Selection of kinds of counters
This sewing machine has four different counters; i.e., the
bartacking counter, belt-loop counter, No. of pcs. counter and
bobbin thread counter.
E
When BARTACKING COUNTER TYPE SELECT button
B , BELT LOOP COUNTER TYPE SELECT button
or NO. OF PCS. COUNTER TYPE SELECT button
is pressed, the corresponding counter type select screen is
displayed. On this screen the counter type can be selected
individually.
To set the bobbin thread counter, press page changeover but-
ton
E to change over the page shown on the screen.
G
Then, press the bobbin thread counter type selection button
F to display the counter type selection screen.
H
– 43 –
C
D
Advertisement
Table of Contents
