How To Change Over The Sewing Shape - JUKI AB-1351 Instruction Manual

2-5. How to change over the sewing shape

A
B
1 Display the belt loop individual sewing data entry screen
Only on the belt loop ndvdual sewng data entry screen (blue),
changeover of the sewng shape s enabled. On the sewng
screen of the belt loop ndvdual sewng (green), press the set
ready key
entry screen (blue).
2 Bring up the sewing shape selection screen
Press sewng shape button
selecton screen s dsplayed.
3 Select the type of sewing shape and confirm your entry
The followng twelve dfferent sewng shapes are avalable.
Select a desred one from among them. Select a desred type
of sewng shape by pressng one of sewng shape selec-
ton buttons B whch corresponds to the desred type. Then,
press enter button
selected is confirmed and the screen returns to the belt loop
ndvdual sewng data entry screen.
Pctograph
C
Belt loop shape No. 1
Belt loop shape No. 2
Belt loop shape No. 3
Belt loop shape No. 4
Belt loop shape No. 5
Belt loop shape No. 6
(Sem-classc type)
– 38 –
to dsplay the belt loop ndvdual sewng data
A , and the sewng shape
C , and the sewng shape you have
Name Pctograph Name
Belt loop shape No. 7
(Both-end roll type)
Belt loop shape No. 8
Belt loop shape No. 9
Belt loop shape No. 10
Belt loop shape No. 11
Belt loop shape No. 12