How To Lower The Garment Body Presser And The Work Clamp Foot - JUKI AB-1351 Instruction Manual

2-7. How to lower the garment body presser and the work clamp foot

A
B
When you press presser lowerng button
ndvdual sewng data entry screen (blue) on the sewng screen of
the belt loop ndvdual sewng (green), the presser lowerng screen
s dsplayed.
Even if you press the presser lowering button immedi-
ately after turning the power on, the error buzzer will
sound and the presser lowering will not start.
Press set ready key
up the sewing screen before pressing the presser low-
ering button.
When you press presser lowerng button
chne carres out the followng operaton and dsplays the presser
lowerng screen.
The garment-body presser comes down and moves backward.
The work clamp foot of the machne head comes down.
When you press presser lftng button
erng screen, the sewng machne carres out the followng opera-
ton and goes back to the entry screen (or sewng screen).
The garment-body presser moves forward and goes up.
The work clamp foot of the machne head goes up.
When you press presser lowering button
or lifting button
machine head and the garment-body presser oper-
ate respectively. take care not to allow your hands to
be caught by the garment-body presser and the work
clamp foot.
– 42 –
A on the belt loop
to retrieve the origin to bring
A , the sewng ma-
B on the presser low-
B , the work clamp foot of the
A