Table of Contents
Advertisement
2-6. How to change the belt loop length
(1) How to change the belt loop dimensions
A
B
1 Displaying the belt loop individual sewing data entry
screen
The belt loop dmensons can be changed on the belt loop
ndvdual sewng data entry screen. On the sewng screen of
the belt loop ndvdual sewng (green), press the set ready
key
to dsplay the belt loop ndvdual sewng data entry
screen (blue).
2 Bringing up the belt loop length entry screen
When you press the button for the belt loop length you want to
change, the correspondng belt loop length entry screen s ds-
played. As an example of belt loop length changng procedure,
take belt loop length A n the belt loop shape No. 4. Press but-
ton
A to dsplay the belt loop length entry screen.
*
Avalablty of belt loop lengths A to F depends on belt loop
shape (.e., belt loop shapes No. 1 to No. 12). Therefore, they
can be classified into two groups; one group consists of the
avalable belt loop lengths and the other conssts of the un-
avalable ones.
*
The ntal value and settable range of the belt loop length df-
fer wth the belt loop shape (.e., belt loop shapes No. 1 to No.
C
12).
3 Entering data
Enter a desred value wth numerc keys and +/- button B .
4 Confirming your entry
Press enter button
confirmed.
*
For the other belt loop lengths, you can change the data fol-
lowng the steps of procedure descrbed above.
1. the dimensions of the belt loop sewing shape
displayed on the operation panel are only for refer-
ence. the dimensions vary according to the belt-
loop material. Be sure to adjust the settings of
belt loop dimensions so that your desired finished
dimensions are achieved.
2. Dimension A set by s002 and s003 is common to all
sewing shapes. the set value, therefore, remains
the same even if you change the sewing pattern. (For
sewing shapes nos. 7, 8 and 9, dimension A set by
s028 and s029 is used. this means that the entire
length of the belt loop may be out of the range (E483)
in the event you have changed the sewing shape.
– 39 –
C , and the data you have entered s
Advertisement
Table of Contents
