Method To Create The Cycle-SewNg Data - JUKI AB-1351 Instruction Manual

(2) Method to create the cycle-sewing data
A
C
F
H
1 Displaying the data entry screen
Only on the data entry screen (pnk), the cycle-sewng data
number can be selected. On the sewng screen (green), press
the set ready key
nce no pattern number s regstered n the ntal screen, the
first pattern selection button is displayed in the blank state.
2 Displaying the pattern number selection screen
When you press pattern selecton
ber selecton screen s dsplayed.
3 selecting a pattern number
Every tme you press up/down scroll buttons
the regstered pattern number button C changes over one
after another.
It s also possble to brng up the pattern number entry screen
wth number nput button
tern number.
E
The button dsplays the descrpton of the pattern data.
D
Now, press pattern No. button you want to select.
4 Confirming the pattern number
B
When you press enter button
selection screen is closed to finish selection.
5 repeating steps of procedure 2 through 4 by the num-
ber of patterns you want to register
Once the first registration is confirmed, the 2nd pattern selec-
ton button
Repeat steps of procedure 2 through 4 by the number of
patterns you want to regster.
You can select the pattern No. button by pressng up/down
scroll buttons
dsplayed n pnk
When you press pattern No. button H shown on the dsplay, the
belt loop pattern data entry screen s dsplayed. On ths screen,
you can set each parameter of the pattern data separately.
If you change the parameter on the belt-loop pattern data
entry screen of the cycle sewng screen, the parameter of
the orgnal belt-loop pattern wll be changed. When settng a
I
parameter, the confirmation screen M589 is displayed. Press
enter button
changng the parameter.
→ Refer to "@-2-6. How to change the belt loop length",
G
p.39
for detals.
When the combned data you have created requres several
screens, you can dsplay the next screen wth screen scroll
button I .
– 78 –
to dsplay the data entry screen (pnk).
D and drectly enter the pat-
E , the pattern number
F wll be dsplayed.
G . The selected patter No. button s
.
E as long as no problem wll be caused by
A , the pattern num-
B ,