Table of Contents
Advertisement
2-21. How to check the sewing shape
cAutIon
:
After the pattern selection, be sure to check the shape of the sewing pattern you have
selected at all times. If the pattern size is larger than the work clamp foot, the needle can
interfere with the work clamp foot during sewing resulting in needle breakage.
A
B
1 Displaying the sewing screen
Brng up the data entry screen (lght blue). When you press the
set ready key
from blue to green. On ths screen, sewng s enabled.
2 Displaying the machine-head jump step sewing screen
When you press step sewng button
head jump step sewng screen s dsplayed.
3 lowering the work clamp foot by means of the start switch
In this mode, the sewing machine will not start even if
D
you press the start switch.
4 Performing jump sewing with the work clamp foot lowered
Check the sewng shape by means of the work clamp foot back-
ward button
When you keep ether button held pressed, the work clamp foot
C
keeps moving even if you release your finger from the button.
E
When you want to stop the work clamp foot, press stop button
F
F When you press "move to ntal poston" button
the screen s closed and the LK unt sewng screen s dsplayed.
If you press the work clamp foot forward/backward
button with the needle bar lowered, the work clamp
foot will automatically lift the needle bar to its upper
position before moving. Be careful.
5 Finishing checking the sewing shape
When you press cancel button
the sewng screen.
– 67 –
, the background color of the LCD changes
B and work clamp foot forward button
D , the screen returns to
A , the machne-
C .
E ,
Advertisement
Table of Contents
