Table of Contents
Advertisement
3-5. Assembling the thread stand and installing on the machine
1
3-6. Installing the machine head support bar
1
3-7. Installing the operation panel IP-420
2
1
2
– 12 –
Insert the thread stand n the hole n table 1 and
fix by fastening a washer and a nut placed on the
top and undersde of table.
Securely mount machne head support bar nclud-
ed n the accessores suppled wth the unt.
Drve machne head support bar 1 n hole 2 n
the machne table.
When tilting the sewing machine, tilt
the sewing machine slowly so that no
excessive force will be applied to the
head support bar.
And when returning the sewing ma-
chine back to its original position,
be careful not to have your hand get
caught between the base and the sew-
ing machine bed.
Open the cover on rght sde face 2 secton of
the IP-420 and connect the connector of cable 1
whch s secured wth adhesve tape on the upper
rght face of the table to the IP-420.
to protect the operation panel IP-420
from malfunctioning due to static
electricity, mount the operation panel
on the operation panel base.
Advertisement
Table of Contents
