Table of Contents
Advertisement
2-26. How to carry out cycle sewing
It is necessary first to change sewing mode to the cycle sewing before setting data.
"@-2-24. How to change the sewing mode", p.72.
→ Refer to
(1) selection of the cycle-sewing data
A
C
1 Displaying the data entry screen
Only on the data entry screen (pnk), the cycle-sewng data
number can be selected. On the sewng screen (green), press
the set ready key
2 Bringing up the cycle-sewing data number selection
screen
When you press cycle-sewng data No. button
cycle-sewng data number selecton screen s dsplayed. Te
cycle-sewng data number whch s currently selected and ts
descrpton are dsplayed on the upper part of the screen. The
other regstered cycle-sewng data numbers and buttons are
dsplayed on the lower part of the screen.
3 selecting the cycle-sewing data number
Every tme you press upper/lower scroll buttons
the cycle-sewng data No. button C changes over one after
E
another.
It s also possble to brng up the cycle-sewng data number
F
entry screen wth number nput button
D
enter the cycle-sewng data number.
B
Now, press cycle-sewng data No. button C you want to se-
lect.
When you press step confirmation buttons
ng shape, etc. regstered n the cycle-sewng data are ds-
played one after another.
4 Confirming the cycle sewing data number
When you press enter button
number selection screen is closed to finish selection.
– 77 –
to dsplay the data entry screen (pnk).
D and drectly
F , the cycle-sewng data
A , the
B ,
E , sew-
Advertisement
Table of Contents
