Direct Connection To A Cellular Telephone; Connection To A Cellular Telephone Through An Rj11 Adapter Box - Paradyne KeepInTouch 3760 User Manual

NOTE:
For information on accessing "cellular.txt" and other help
text files, refer to the section Where to Find Additional
Information in Chapter 1, Introduction.
Direct Connection
to a Cellular Telephone
To connect the modem to a cellular telephone with a Cellular
Direct Connect Cable, first install the modem in your PC, as
described in Chapter 2, Installation . Then use the following
procedure and Figure 2-1 (in Chapter 2) to connect your modem
directly to a cellular telephone:
1. Plug the cellular cable's 9-pin connector into the modem's
9-pin rear edge connector. The connector's slot must face
up.
2. Attach the other end of the cellular cable to the cellular
telephone.
3. You may need to upgrade the firmware on your modem to
support your specific model of cellular telephone. For more
information, refer to the "cellular.txt" help text file.
Connection to a Cellular Telephone
through an RJ11 Adapter Box
To purchase an adapter box, contact your cellular telephone
supplier. Make sure you specify the type of telephone you have
since several types of adapters are available.
To connect the modem to a cellular telephone through an RJ11
adapter box, first install the modem in your PC, as described in
Chapter 2, Installation . After installing the modem in your PC ,
follow the instructions which are supplied with the RJ11 adapter
box.
D-2
Issue 3 April 1994