C200Hw-Prm21 Profibus Dp Master Dtm; Configuration User Interface - Omron SYSMAC CS Series Operation Manual

C200HW-PRM21 PROFIBUS DP Master DTM

3-4

C200HW-PRM21 PROFIBUS DP Master DTM

C200HW-PRM21 Master
DTM
3-4-1

Configuration User Interface

Master DTM Configuration
User Interface
To allow configuration and data monitoring for a C200HW-PRM21 from within
CX-Profibus a C200HW-PRM21 PROFIBUS DP Master DTM is available,
which can be operated from CX-Profibus.
The C200HW-PRM21 PROFIBUS DP Master DTM has two main user inter-
face components.
• DTM Configuration User Interface
This user interface facilitates configuration of the Master Unit.
• DTM Diagnostics User Interface
The DTM Diagnostics User Interface facilitates Unit status determination,
and the slave status determination.
This section provides an overview of the C200HW-PRM21 PROFIBUS DP
Master DTM, and discusses both user interfaces.
The configuration DTM is opened by
• Selecting the C200HW-PRM21 Master DTM in the Network view, and
double-clicking the left mouse button.
• Selecting the Master DTM in the Network view, and right-clicking the
mouse. From the context menu, select Configuration.
The Master DTM Configuration User Interface, which is displayed in the CX-
Profibus DTM view is shown below.
The Master DTM Configuration User Interface consist of two tabs:
• Bus Parameters tab
• Address Table tab
The two tabs are discussed below.
Section 3-4
87