CX-Profibus
3-2-2
CX-Profibus Main Window
Tool Bar
Network view
54
The main application window of CX-Profibus will open with a New Project.
After the first start up, the Device Catalogue will be opened automatically. If
not, the Device Catalogue may be opened from the menu.
The figure below shows the opened CX-Profibus application window with a
Project already containing a network, and the Device Catalogue window
opened.
Network view
Error Log and FDT Monitoring view
The main components in this window are
• The Network view.
• The DTM / Catalogue view.
• The Error Log view.
• The FDT Monitoring view (not shown in the figure above).
• The Main menu.
• The Tool Bar and the Status Bar.
The Network view displays the structure of the PROFIBUS network in a tree
view format. The tree has at least three levels:
• The Project Level.
• The master level.
• The slave level.
Device Catalogue
DTM view
Section 3-2
Status Bar