Area Selection; Set Init Value; Usb Power Mode - Ricoh BRG-P1w Field Service Manual

2. Appendix: SP Mode Tables
5-804-023
5-804-024
5-804-025

Area Selection

5-807-001

Set Init Value

5-831-001

USB POWER MODE

5-844-011
50
Displays the temperature reading of the temperature sensor in the DRV board
circuits.
Units: 0.1oC
INPUT CHK RCWS
This SP code checks the current status of the right ink sump. Displays "1" if set
correctly.
INPUT CHK RCWR
The SP code checks and displays the amount of space remaining in the right ink
sump.
INPUT CHK RCWC
This SP code checks and displays the software count for the right ink sump.
Area Selection
Use this SP code to specify the destination.
Set Init Value
Use this SP code to set initial value.
USB POWER MODE
Use this SP code to specify whether to enable or disable Power Interlock via USB (a
function to detect if a USB cable is connected and if the power of the host computer
connected via USB is on or off and switching the printer on or off accordingly).
Right Ink Sump Set Status
Right Ink Sump Capacity
Right Ink Sump Count
-
-
Power Interlock via USB