2. Appendix: SP Mode Tables
SP5-XXX
Plotter Settings
5-804-001
5-804-002
5-804-003
Input Check: Sensors
5-804-004
No.
0
Top Cover Switch
1
Not Used
2
Not Used Duplex Unit Set Sensor
3
Multi Bypass Set Sensor
Paper Feed Unit (Tray 2) Set
4
Detection
5
1st Registration Sensor
6
2nd Registration Sensor
46
PLOTTER NUMBER
Use this SP to specify the plotter's machine number (11 digits).
PL0TTER SW1
PL0TTER SW2
DFU
INPUT:SENSCHK1
Use this SP to display the on/off status of each sensor and switch. The status of
each sensor (0, 1) is displayed on the 2nd line of the display.
Meaning
Plotter Machine Number Setting
SW1(7-0bit)
SW2(15-8bit)
Check Input Sensors
No.
8
Paper Feed Unit (Tray 2) Relay Sensor
9
Paper End Sensor (Tray 1)
10
Paper End Sensor (Tray 2)
11
Paper End Sensor (Tray 3)
12
Not Used
13
Ink Level Sensor (Feeler)
14
Maintenance HP Sensor
Meaning