Use this SP to set the threshold value of the firmware counter to trigger the full alert
for the right ink sump.
Reset and Restoration Settings
RST:INIT CNT:F
3-008-001
Resets the initial fill counter to the initial factory setting (-2).
3-008-002
RST:INIT CNT:A
Resets the initial fill counter to the initial factory setting before shipping (-1).
RST:WASTE:RC
3-008-003
Resets the ink flag and ink counter for the right Ink Collector unit.
3-008-004
RST:WASTE:R
Resets the ink counter for the right ink sump.
3-008-005
RST:FACT
Resets and threshold settings and user adjusted values.
Maintenance, Replacement
3-009-001
WASHING
Executes the automatic flushing procedure.
3-009-002
CARRIAGE CHANGE
Execute this SP after replacing the carriage unit.
SP4-XXX
Not used.
Reset Initial Tank Fill Count to Manufacturing
Operation Count
Reset Initial Tank Fill Count to Factory Shipping
Reset Ink Collector Count/Flag: Right Ink
Collector unit
Reset Ink Collector Count/Flag: Right Ink Sump
Restore Factory Default Setting
Execute Auto Washing
After Carriage Replacement
SP Mode Service Tables
45