Ricoh BRG-P1w Field Service Manual page 179

OK?
7. [#Enter].
• Wait for the report to print (it does not start immediately).
• Printing requires about 2 min.
8. Exit the Service Menu, and switch the machine off.
9. [Power] to switch the machine on.
Here is a brief summary of what is listed in the Engine Summary Chart.
Heading
MODEL
SER_NO
DUMMY_NO
Firm Ver
SENSOR 1
SENSOR 2
SENSOR 3
SP No, Name, Value
Sensor 1: Input Sensors (1 of 2)
The status of these sensors are also displayed by SP5-804-004.
No. Meaning
0 Top Cover Switch
1 Not Used
2 Duplex Unit Set Sensor
3 Multi Bypass Set Sensor
Paper Feed Unit (Tray 2) Set
4
Detection
5 1st Registration Sensor
6 2nd Registration Sensor
Number of the Printer Model
Printer Serial Number
Version number of the firmware in the printer
See details below.
SP number, name, value of current setting
No. Meaning
8 Paper Feed Unit (Tray 2) Relay Sensor
9 Paper End Sensor (Tray 1)
10 Paper End Sensor (Tray 2)
11 Not Used
12 Not Used
13 Ink Level Sensor (Feeler)
14 Maintenance HP Sensor
Meaning
Status Reports
177