[Machine: Productivity]; 0401 [Number Of Sheets For Auto Color Selection]; 0402 [Print Mode When Switching Paper Type] - Ricoh Pro C9500 Adjustment Manual

[Machine: Productivity]

0401 [Number of Sheets for Auto Color Selection]

Specify the number of sheets the machine prints in full color mode before switching to black-and-white
mode when printing a job which involves full color printing followed by black-and-white printing.
When the machine prints a job which involves full color printing followed by black-and-white printing,
you can specify whether to perform the black-and-white printing in full color mode, or whether to switch
to black-and-white mode after printing a specified number of black-and-white sheets in full color mode.
Because switching from full color to black-and-white mode takes time, you can improve throughput by
increasing the number of sheets printed prior to switching.
For example, if you set this to "5 sheets", the machine stays in full color mode even if it prints a 15-page-
job with the first ten pages in color and the rest in black and white.
If you print black-and-white originals in full color mode, the replacement cycles of the toner bottle, waste
toner bottle and photoconductor unit will be shortened because the cyan, magenta and yellow
development units are operated.
For details, see "Notes When Continuously Performing Black and-White and in Color Printing", Shared
Maintenance Offering: Troubleshooting.
Setting Item
[FC to BW]

0402 [Print Mode When Switching Paper Type]

Adjust the waiting time by selecting the operation between the consolidated jobs.
Setting Item
[Setting]
Default Max.
Value Value
0 99
Values
[Fusing Priority Mode]
[Normal Mode]
[Productivity Mode]
[Machine: Productivity]
Min.
Step
Value
0 1 sheet(s)
Default Value
[Normal Mode]
Unit
15