Ricoh BRG-P1w Field Service Manual page 344

SC Pattern
Software performance error
If the processing program shows abnormal performance and the program is
abnormally ended, this SC is issued.
CTL board defective
89900 D
Software defective
Turn the main power switch off and then back on.
Update the firmware on the CTL board.
Replace the CTL board.
SC Pattern
The external controller function abnormal
The applications for the external controller fail or writing on the EEPROM fails.
The external equipment fails.
Firmware uploading failure
91505 A
EEPROM (NV memory) error
EEPROM (NV memory) connection error
CTL board error
The external equipment error
Update the firmware. Replace the external equipment. Replace the CTL board.
SC Pattern
Thermal error in the DRV circuit
93200 D
Turn the main power switch off and then back on.
SC Pattern
HRB fuse blown
93300 D
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Codes
97