Scanning Area; Scan Magnification Correction - Ricoh MP CW2201 Field Service Manual

Hide thumbs Also See for MP CW2201:

Table of Contents

Scanning Area

During scanning, the CIS corrects the image density line by line. To do this, it starts 3 mm from the

leading edge of the original [B], and reads 60 mm to the left and to the right of center.

These start positions can be adjusted with the following SP codes:

• SP4-901-005 Digital AE -Start Position

• SP4-901-006 Digital AE -Left Start Position

• SP4-901-007 Digital AE -Right Start Position

Magnification (enlargement/reduction) correction in the sub scan (vertical) direction is done by

adjusting the speed of the scanner motor with SP2-116 (Copier Sub Scan Magnification Correct)

Adjustment is done relative to the default setting "0" (100%).

• Reducing the setting increases the speed of the scanner motor, and the image is reduced when it

Scanner Unit