Status Monitor Messages - Ricoh BRG-P1w Field Service Manual

6. Troubleshooting
C: Tray 1
ON: Paper jam detected
--- : Paper jam not detected
Branch
2nd
-04 ---
-05 On
-06 ---
-09 On
-10 ---
-11 On
-15 On

Status Monitor Messages

Bypass Tray Not Detected
The bypass tray unit is not mounted correctly. Mount it correctly.
234
Sensor
TE T-2
Paper is jammed between the Tray 2 relay sensor and trailing
edge sensor.
--- On
If the paper was fed from Tray 2, its trailing edge is remaining in
Tray 2.
1. The paper is jammed at the 2nd registration sensor. It is not
located at the trailing edge sensor.
--- On
2. The paper is jammed in between the Tray 2 relay sensor and
trailing edge sensor.
The paper is jammed in between the trailing edge sensor and 2nd
registration sensor. It is also jammed at the Tray 2 relay sensor.
On On
If the paper was fed from Tray 2, its trailing edge is located before
the Tray 2 relay sensor (closer to Tray 2).
1. The paper is jammed at the 2nd registration sensor. It is not
--- ---
located at the trailing edge sensor or Tray 2 relay sensor.
1. The paper is jammed in between the trailing edge sensor and
On --- 2nd registration sensor. It is not located at the Tray 2 relay
sensor.
1. The paper is located past the Tray 2 relay sensor (closer to
On ---
the output tray).
The paper is jammed in the entire paper path between Tray 2 and
On On
the 2nd registration sensor.
F: Trailing edge sensor (TE)
Jammed paper location