Ricoh BRG-P1w Field Service Manual page 207

No. Message
Paper Misfeed Bypass Tray/
39
Reset Paper
Paper Misfeed Tray 2/ Reset
40
Paper
Paper Misfeed Tray 1/ Reset
41
Paper
Remove Misfeed Open Top
42 Cover / Press Form Feed,
remove misfeed
Paper Misfeed Remove Duplex
43 or/ Tray2 Rear Cover remove
misfeed
Remove Misfeed Duplex Unit/
44 Remove Misfeed from Duplex
Unit
45 Reset Duplex Unit correctly
Paper Misfeed Remove all
46 Rear/Covers then remove
misfeed
Paper Misfeed remove Tray
47 2/or Rear Covers, remove
misfeed
Paper Misfeed remove Rear
48
Covers, remove misfeed
Paper Misfeed remove Tray 2
49 or Rear Covers, remove
misfeed
5. ERR
Paper has jammed in or failed to feed from the multi bypass
tray. Remove the paper from multi bypass tray.
Paper has jammed in or failed to feed from Tray 2. Remove
the paper from Tray 2.
Paper has jammed in or failed to feed from Tray 1. Remove
the paper from Tray 1.
Paper has jammed in or failed to feed from in the area
below the top cover. Remove the paper from the area below
the top cover.
Paper has jammed in or failed to feed from the duplex unit or
feed unit of Tray 2. Remove the paper.
Paper has jammed in or failed to feed from the duplex unit.
Remove the paper from the duplex unit.
The duplex unit is not mounted correctly and/or the duplex
unit cover is open. Mount the duplex unit correctly and close
the duplex unit cover.
The fed paper has failed to reach the Tray 2 relay sensor.
Remove the paper.
The paper fed from Tray 2 is jammed in the Tray 2 paper
path.
Remove the paper.
The paper fed from the tray is jammed in the Tray paper
path.
The paper fed from Tray 2 is jammed in the Tray 2 paper
path.
Remove the paper.
Error Codes
Action
205