Ricoh BRG-P1w Field Service Manual page 230

6. Troubleshooting
Action 2
Jam 8 Not Used
Jam 9 Registration Late Jam: Tray 1
Paper Misfeeed
Message
Press the Form Feed button.
Cause
After the paper fed from the tray, or when the paper was inverted for duplexing, after
Details the trailing edge sensor went ON, the registration sensor failed to detect within the
prescribed time.
Action 1
Action 2
Jam 10 Registration Late Jam: Tray 2 (PFU)
Paper Misfeeed
Message
Press the Form Feed button.
Cause
After the paper fed from the tray, or when the paper was inverted for duplexing, after
Details the trailing edge sensor went ON, the registration sensor failed to detect within the
prescribed time.
Action 1
Action 2
228
• Clean transport belt.
• Replace TE sensor.
• Replace Tray 2.
• Paper feed rollers slipped, could not feed paper
• Paper caught, warped in paper feed path.
• Press [Form Feed] key on operation panel.
• Replace registration sensor 1.
• Replace trailing edge sensor 2.
• Paper feed rollers slipped, could not feed paper
• Paper caught, warped in paper feed path.
• Press [Form Feed] key on operation panel.
• Replace inverter guide.
• Replace TE sensor.
• Replace CTL board.