Ricoh BRG-P1w Field Service Manual page 325

3. Appendix: Troubleshooting Guide
No.
Load Paper or Form Feed/
32
(paper size) (paper type)
Ink Collector is not set/Set the
33
Ink Collector Unit
Ink Collector Unit is full/
34
Replace Ink Collector Unit
Right Front Cover is open /
35
Close Right Front Cover
Open Front Cover /Replace
36
Ink Crtg
Paper Misfeed / Press Form
37
Feed
Remove Misfeed Open Top
38 Cover/Press Form Feed,
remove misfeed
Paper Misfeed Bypass Tray/
39
Reset Paper
Paper Misfeed Tray 2/ Reset
40
Paper
Paper Misfeed Tray 1/ Reset
41
Paper
Remove Misfeed Open Top
42 Cover / Press Form Feed,
remove misfeed
78
Message
When using Auto Tray Select, the type and/or size of the
paper in any of the paper trays does not match the type
and/or size of the paper selected for the job. Replace the
paper in the tray with paper of the size/type selected for the
job, and then change the paper size/type on the operation
panel. Or, press [Form Feed] and select another tray
holding paper of the size/type selected for printing. Press
[Job Reset] to delete any data remaining from the previous
job. The tray numbers depend on the machine model.
• The trays are designated Tray 1, 2 or Bypass.
The replaceable ink collector unit is not set correctly. Set the
ink collector unit correctly.
Ink collector unit is full. Replace the ink collector unit.
The right front door is open Close the right front door.
Ink cartridge has run out for the color indicated on the
operation panel display. Replace the ink cartridge for the
color indicated on the operation panel display.
Paper failed to feed from the specified tray. Press [Form
Feed] to eject the sheet.
Paper scraps remain in the machine, or a jammed sheet has
not been removed. Press [Form Feed] to eject the sheet, and
then, remove the paper from the area below the top cover.
Paper has jammed in or failed to feed from the multi bypass
tray. Remove the paper from multi bypass tray.
Paper has jammed in or failed to feed from Tray 2. Remove
the paper from Tray 2.
Paper has jammed in or failed to feed from Tray 1. Remove
the paper from Tray 1.
Paper has jammed in or failed to feed from in the area
below the top cover. Remove the paper from the area below
the top cover.
Action