Ricoh BRG-P1w Field Service Manual page 320

Error Type
An abnormal condition exists that
prevents the machine from printing. The
machine cannot print until the condition
has been corrected. Once the condition
Abnormal
has been corrected, the machine can
Conditions
resume printing without cycling the
machine off/on. The corrective
measures can be done by the operator
to restore operation.
An abnormal condition exists indicating
a breakdown that prevents the machine
from printing. After the cause of the
problem has been removed, the
Breakdown or
machine must be cycled off/on to
failure error (SC)
restore normal operation. The machine
basically requires servicing (the
problem cannot be solved by the
operator).
The designated print operation cannot
Print/Data Errors
function, or there is a print data error.
Description Main Error
• Ink cartridge empty (printing
possible)
• Ink cartridge empty (printing not
possible)
• Ink end print error
• Used ink cartridge
• Ink collector unit full
• Used ink collector unit
• Paper jam
• Confirmation after re-filling
• Cover Open
• Unit not detected
• Paper jam
• Print Cartridge(s) Not
Detected/Cover Open
• Paper size or paper type
mismatch error
• Paper size error
• No paper present
• Temperature out of operation
range
See the "Error Code" table.
• Memory overrun
• Work memory overrun
• Data flow interruption
Error Codes
73