• The adjustment value in the Read Direction is the difference between the single vertical line
and cross vertical line.
• If the difference is one calibration mark on the "+" side, for example, the adjustment is +1.0.
10. Fold the sheet in half widthwise.
11. Determine the 2nd adjustment for the Feed Direction. The value read after folding the sheet
widthwise, is the adjustment value for the Feed Direction.
12. [ /Menu] or [
]> "Adjustment"> [#Enter].
13. [ /Menu] or [
]> Select the paper tray> [#Enter].
14. [ /Menu] or [
]> Select the paper type> [#Enter].
15. Enter the adjustment for the Read Direction determined in Step 9 and push [#Enter].
16. Enter the adjustment for the Feed Direction determined in Step 11 and push [#Enter]. This
completes the adjustment.
17. Push [ /Menu] to leave the Menu mode.
• The "Plain", and "Glossy" are provided because the sensor timing for each medium is different.
Print Head Cleaning and Adjustment
145