Ricoh BRG-P1w Field Service Manual page 222

6. Troubleshooting
SC Pattern
57301 D
SC Pattern
57302 D
SC Pattern
57400 D
SC Pattern
58000 D
SC Pattern
63701 D
220
Error Name / Detection Criteria / Major Cause / Solution
Thermal sensor error
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Power harness error
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
KAKA correction error
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
37V power detection timeout
The machine cannot detect 37V power from the power supply within a
designated time.
Defective PSU
Turn the main power switch off and then back on. Replace the PSU.
Error Name / Detection Criteria / Major Cause / Solution
IF Tracking information error
The machine asserts the tracking information of the interface.
Interface failure
CTL board error
Turn the main power switch off and then back on. Replace the CTL board.