4. Replacement and Adjustment
8. Pull the paper feed roller shaft [A] out from the left side of main machine and remove the entire
paper feed roller [B] and 2 press rollers [C].
Re-installation
1. When you mount the paper feed roller into the shaft, mount the side with the fixing pin's guide first.
Connecting Rollers
Preparation
• Duplex unit (
• All covers (
• Feed clutch (
• Bypass drawer connector (
• Vertical encoder wheel (
• Charger roller (
126
p.48)
p.50)
p.93)
p.117)
p.71)
p.96 "Transport Belt, Charge Roller, Pressure Plate, Pressure Rollers")