Error And Status Messages Appear On The Smart Organizing Monitor - Ricoh SP 110 SU User Manual

Error and Status Messages Appear on the
Smart Organizing Monitor
Message
Printer Power Off
(Communication
Error)
Out of Paper / Paper is not loaded in the
Misfeed machine's input tray, or paper
jam has occurred.
Paper Size Mismatch The paper size specified on the
machine and the size specified
in the printer driver do not
match.
Paper Type The paper type specified on the
Mismatch machine and the type specified
in the printer driver do not
match.
Memory Overflow The data is too large or
complex to print.

Error and Status Messages Appear on the Smart Organizing Monitor

Causes
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
Solutions
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
If paper is not loaded, load paper in the
input tray. For details about loading
paper, see page 25 "Loading Paper".
If paper is jammed inside the machine,
remove the jammed paper. For details
about removing jammed paper, see
page 64 "Paper Feed Problems".
• For details about specifying the paper
size setting on the machine, see
page 25 "Loading Paper". For details
about changing the paper size setting
in the printer driver, see the printer
driver Help.
• If [Auto Continue:] is set to [0 sec], no
error message appears.
• For details about changing the paper
type setting of the machine, see
page 25 "Loading Paper". For details
about changing the paper type
setting in the printer driver, see the
printer driver Help.
• If [Auto Continue:] is set to [0 sec], no
error message appears.
Select [600 x 600 dpi] in [Resolution:] to
reduce the size of data. For details, see the
printer driver Help.
75