Tests; Diagnostics; Installation Report; Information - Lennox iComfort S30 Installation And Setup Manual

Table 14. Service Alert Codes
Alert Code Description
3000 Filter 1
3001 Filter 2
3002 Humidifier pad
3003 UV light
3004 Maintenance
3005 PureAir maintenance
4000 User Wi-Fi state change, disabled.
4001 Firmware download failed
4002 Image file download failed
t
Ests
Verify Airflow Per Zone is the first screen to appear under this selection. If
no zoning is installed, zone airflow settings will be for zone 1 only. If zoning
equipment is detected by the system then zones 1 through 4 will be listed.
These screens allow for verification and modification of CFMs for blower,
heating and cooling circulation. Touch continue to proceed to the next screen.
Select Test to Run is the next screen to appear. Depending on hardware
present, various tests are available. By default all items to be tested are
enabled. Selecting a specific test will un-check the item. When a specific set
of tests are completed the results will be displayed on the screen next to the
tested item. Touch continue to proceed to the next set of test items. Once
all tests are completed press done to return to the touch tests to run screen.
Touch the left arrow at the top left side of screen to return to the Dealer Control
Center.
D
IagnostICs
This screen allows the installer to test all major communicating components
of the system indoor unit (air handler or furnace), outdoor unit (air conditioner
or heat pump) and zoning control (if applicable). Pressing the stop diagnostics
button will pause the diagnostic function.
Touch the left arrow at the top left side of screen to return to the Dealer Control
Center.
I r
nstallatIon Eport
The overview screen provides information on dealer and customer information.
Also included under day of install section is information on conditions at the time
of installation. Information includes date, time indoor and outdoor temperatures
and indoor humidity. Under equipment, system, indoor/outdoor and zoning
model number, serial number and firmware information is displayed.
Other menus items include system indoor and outdoor units and zoning control
parameter settings.
NOTE: Installation Report is not available until after exiting the dealer control
center following commissioning. Return to the dealer control center
from the home screen to view the installation report.
I
nFormatIon
The dealer information screen will appear. The next screen will be for dealer
information. Here either the dealer ID or phone number can be added. Once the
system is connected to the Internet, the remaining information is automatically
populated. Not all information for this screen will be viewable. Touch and hold
and then drag up to access the remaining information on the screen.
Information Required: Dealer ID and / or dealer phone number. Information
that can be manually entered is name, email website, dealer address which
includes address 1, address 2, city state and zip/postal code. Once completed,
touch the left arrow at the top left side of screen to return to the Dealer Control
Center.
Adding dealer information will ensure the thermostat is associated with your
LennoxPros account when connecting to the Lennox server.
Warning Screen: If the dealer ID or phone number is not provided, a warning
screen will appear. The warning screen will provided information on the
limitation imposed on the system if this information is missing. Touch no to
return to the above screen to complete the information requested or press yes
to continue.
On this screen general information needs to be verified or changed. Touch
any item to change its contents. A pop-up screen will appear that will allow the
information to be added or changed.
Information Required:
1. Select desired language (ENGLISH, FRANÇAIS or ESPAÑOL).
2. Select country / region.
3. Select time and date which includes time, date, time zone, daylight savings
time (ON/OFF)
4. Temperature unit (Fahrenheit or Celsius).
5. Once completed press continue.
38
IMPORTANT
General Information