Dealer Control Center - Lennox iComfort S30 Installation And Setup Manual

Dealer Control Center

This menu provides access for the installer or service technician to perform various functions. Advance equipment configurations, notifications, tests, diagnostics,
installation reports and general information about the system.
To navigate back to the dealer control center,
<
touch on the Dave Lennox icon when available
on the top left-hand side of the screen.
<
To navigate back to the previous screen, touch
"Previous Screen
on the left arrow when available.
Name"
Use to make changes to equipment settings and add or remove
non-communicating equipment or accessories. In addition the reset all
equipment option is available. This will allow the installer to reset all
Use to run test on
system components
Use to display
system notifications
notifications
equipment
equipment and reconfigure.
Figure 18. Dealer Control Center
Use to run
diagnostics on
system components
diagnostics
tests
dealer
control center
information
exit
Exit to Home
screen.
20
Used to display installation results.
NOTE: This report is not available until after
installation exiting the dealer control center following the
report
commissioning procedure. Exit and return to
the dealer control center to view the installation
report.
Use to display
system information