Maintenance History; Tests; Diagnostics; Information - Lennox iComfort S30 Installation And Setup Manual

MAINTENANCE
HISTORY
This screen provides information on past maintenance performed on the system.
Information can be sorted by last 24 hours, last 30 days , last 12 months and all.
Additional maintenance tasks can be added using the add manual entry options
located in the upper right portion of the screen. Details concerning each listed
history can be displayed by pressing on the desired history.

TESTS

Verify Airflow Per Zone is the first screen to appear under this selection. If no
zoning is installed, zone airflow settings will be for zone 1 only. If zoning equipment
is detected by the system then zones 1 through 4 will be listed. These screens allow
for verification and modification of CFMs for blower, heating and cooling circulation.
Press continue to proceed to the next screen.
Select Test to Run is the next screen to appear. Depending on hardware present,
various tests are available. By default all items to be tested are enabled. Selecting a
specific test will un-check the item. When a specific set of tests are completed the
results will be displayed on the screen next to the tested item. Press continue to
proceed to the next set of test items. Once all tests are completed press done to
return to the select tests to run screen. Press the left arrow at the top left side of
screen to return to the Dealer Control Center.

DIAGNOSTICS

This screen allows the installer to test all major communicating components of the
system indoor unit (air handler or furnace), outdoor unit (air conditioner or heat
pump) and zoning control (if applicable). Pressing the stop diagnostics button will
pause the diagnostic function.
Press the left arrow at the top left side of screen to return to the Dealer Control
Center.

INFORMATION

DEALER INFORMATION
The dealer information screen will appear. The next screen will be for dealer
information. Here either the dealer ID or phone number can be added. Once the
system is connected to the Internet, the remaining information is automatically
populated. Not all information for this screen will be viewable. Press and hold and
then drag up to access the remaining information on the screen.
Information Required: Dealer ID and / or dealer phone number. Information that
can be manually entered is name, email website, dealer address which includes
address 1, address 2, city state and zip code. Once completed press continue.
IMPORTANT: ADDING DEALER INFORMATION WILL ENSURE THE
®
ICOMFORT S30 IS ASSOCIATED WITH YOUR DAVENET ACCOUNT WHEN
CONNECTIONG TO THE LENNOX SERVER.
Warning Screen: If neither the dealer ID or phone number is provided, a warning
screen will appear. The warning screen will provided information on the limitation
imposed on the system if this information is missing. Press no to return to the
above screen to complete the information requested or press yes to continue.
GENERAL INFORMATION
On this screen general information needs to be verified or changed. Press any item
to change its contents. A pop-up screen will appear that will allow the information to
be added or changed.
Information Required:
1. Select desired language (ENGLISH, FRANÇAIS, ESPAÑOL).
2. Select country / region.
3. Select time and date which includes time, date, time zone, daylight savings
time (ON/OFF) and temperature unit (Fahrenheit or Celsius).
Once completed press continue.
HOME ADDRESS
On this screen general information needs to be verified or changed. Press any line
item to change its contents. Information to be added is address 1, address 2, state,
city and zip code.
Complete the requested information and press the continue button.
49