Lennox iComfort S30 Installation And Setup Manual page 14

SLP98 & G71MPP FURNACE
(IFC) OR AIR HANDLER (AHC)
SMART HUB
Mag-Mount
26L56 CURRENT SENSING RELAY
KIT.
NOTE: PASS THE BLOWER MOTOR
L1 WIRE THROUGH THE
RENT SENSING RELAY AS SHOWN.
HVAC HEAT OR COOL CALL, OR THE FAN IS IN CONTINUOUS
OPERATION, THE VENTILATION CONTROLLER WILL OPEN OA
DAMPER TO VENTILATE IF THE OUTDOOR TEMPERATURE AND
TION CONTROLLER.
LVCS. SET CYCLE TIME TO 1 HOUR; SET VENTILATION TIME TO 60 MINUTES.
®
NOTE: USE THE ICOMFORT S30 CIRCULATE FAN PERCENTAGE OF ON TIME TO CONTROL VENTILATION TIME.
ICOMFORT
ICOMFORT
FURNACE OR OUTDOOR AIR
AIR HANDLER
CONDITIONING
OR HEAT PUMP
(POWER COMPANY INTERRUPTION
SYSTEMS ARE WIRED SAME AS
OVERFLOW SWITCH)
ICOMFORT
FURNACE OR AIR
HANDLER
HEPA BYPASS FILTER X2680 HEPA
INTERLOCK KIT
ICOMFORT
FURNACE OR AIR
HANDLER
Figure 13. Optional Accessories
LVCS VENTILATION CONTROL
SYSTEM
ICOMFORT
2-STAGE
FURNACE
DS
CUT
R-DS
W914
R
STANDARD 1 OR 2 STAGE
AC OR HP UNIT
TOR COMMON WIRE
THROUGH CURRENT LOOP.
SEE HEPA INTERLOCK KIT
FOR INSTALLATION DETAILS
14