Snmp-Server Community - Planet Networking & Communication SGS-6340-24T4S Command Manual

Example:
Switch#show snmp view
View Name:readview
Displayed Information
View Name
1.and1.3.
Included
Excluded
active

1.4.12 snmp-server community

Command:
snmp-server community {ro | rw} {0 | 7} <string> [access {<num-std>|<name>}] [ipv6-access
{<ipv6-num-std>|<ipv6-name>}] [read <read-view-name>] [write <write-view-name>]
no snmp-server community <string> [access {<num-std>|<name>}] [ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
Function:
Configure the community string for the switch; the no command deletes the configured community string.
Parameter:
<string> is the configured community string. If key option is set as 0, the specified community string is not encrypted,
if key option is set as 7, the specified community string is encrypted;
ro | rw is the specified access mode to MIB, ro for read-only and rw for read-write;
<num-std> is the access-class number for standard numeric ACL, ranging between 1-99;
<name> is the access-class name for standard ACL, the character string length is ranging between 1-32;
<ipv6-num-std> is the access-class number for standard numeric IPv6 ACL, ranging between 500-599;
<name> is the access-class name for standard IPv6 ACL, the character string length is ranging between 1-32;
<read-view-name> is the name of readable view which includes 1-32 characters;
<write-view-name> is the name of writable view which includes 1-32 characters.
Command mode:
Global Mode
1. -Included active
1.3. Excluded active
Explanation
View name
OID number
The view includes sub trees rooted by this OID
The view does not include sub trees rooted by
this OID
State
1-102