Telephone Overview - Nortel M7310 Manual

Your Enterprise Edge M7310 Telephone
Shift button
For using the top function of a dual-memory button.
Display
shows the time, date, call information, and guides you.
The lower line of the display is reserved for display button instructions.
Dual-memory buttons
store any two features and/or autodial numbers.
Display buttons
Feature button
starts or ends a feature.
Release button
cancels active calls.
Hold button
Dial pad
Memory and line buttons
are buttons with indicators for one
touch dialing, feature operation
or line access.
Volume control
Indicators
appear beside lines and features.
Using display
buttons
Using Button
Inquiry
Adjusting display
contrast
Selecting a ring
type and volume
level
Page 1 Enterprise Edge M7310 User Card
Three display buttons appear directly below
the display. When they are active, these
buttons are labelled in capital letters on the
bottom line of the display. In Enterprise Edge
documents, display buttons are shown as
underlined, capital letters: for example,
Check what is programmed on your memory buttons.
1. Release all calls or lines with dial tone.
2. Press ƒ•‚
3. Press the button(s) that you want to check and read the display.
4. Press ƒ
1. Press ƒ•‡
2. Press UP or DOWN
3. Press OK when finished.
1. Press ĥfl
2. Press ⁄ , ¤ , ‹
3. While the telephone is ringing, press
volume level.
4. Press to store the volume level and ring.
OK˚
OK
.
when finished.
.
for the level you want.
.
, › , or ˚ NEXT to hear the different ring types.
√
Show line:_
COPY OK
.
to adjust the
Display message
Display button message
Display button